NEIEP Passenger Elevator Door and Entrance Installation (525) Practice Test

These questions are part of the practice quiz. Start practicing

• By how much should a closed swing door overlap the top and sides of the frame?
• Which floor is it generally good practice to begin door installation?
• What is the primary reason for conducting regular maintenance on elevator doors?
• When installing horizontal sliding doors, which measurement is critical for ensuring a proper fit across the frame?
• What is a common feature of modern elevator doors to enhance passenger safety?
• What must be ensured regarding the elevator door when testing functionality?
• How can elevator door installation standards impact safety?
• How many tracks are associated with single-speed, horizontal sliding doors?
• How do environmental factors affect elevator door materials?
• Which component helps to prevent the doors from closing when an object is detected?
• When using self-drilling anchors, what must the hammer drill adapter be?
• Why should elevator doors have a smooth finish?
• What does the term "entrance frame" refer to?
• What is the maximum running clearance allowed between the bottom of the door and the sill?
• What is an essential component of elevator door safety systems?
• What is a key consideration when installing elevator entrance doors?
• How do emergency stop buttons influence elevator door function?
• Metal doors should be stored vertically on their _______ edge?
• What regulatory body's guidelines dictate the design and installation of elevator doors?
• What is one reason hydraulic elevators might require different door specifications compared to traction elevators?
• How are entry frames typically attached to the hoistway?
• What is the primary function of a passenger elevator door?
• In what types of buildings are narrow elevator doors often used?
• How can improper installation affect elevator door performance?
• What type of wiring is required for interlock circuits to withstand high temperatures?
• Why is a pit depth important in elevator installations?
• What is the impact of testing elevator door operation post-installation?
• What is one of the key benefits of using weatherproof materials in elevator doors?
• What is the minimum headroom requirement for passenger elevators?
• What does a door stuck in the open position indicate?
• Which of the following is a type of entrance used for passenger elevators?
• True or False: The return jamb is the side of the entrance that the door closes against.
• True or False: The track of a door may or may not be directly above the sill groove.
• What should be put in the walls if fixture boxes cannot be installed immediately?
• The clearance between the bottom of a swing door and the sill must not exceed?
• What is the purpose of door sills in elevators?
• What is the role of a hall call button in elevator systems?
• What is used to ensure smooth operation of heavy elevator doors?
• What is the primary reason for using a blockout in wall installations?
• What can be used to reduce noise during door operation?
• What is the advantage of automatic doors over manual doors in elevators?
• What is the typical installation height of the push button box above floor level?
• What is the impact of using low-strength materials in elevator door construction?
• What is the maximum allowable gap between the leading edge faces of a center-opening door when it is fully closed?
• What are installed on elevator doors to keep them in place during a fire?
• What type of door mechanism is commonly required in service and hospital elevators for wider entrances?
• Can frame straps be moved to position sill support brackets when installing jackbolt-type sills?
• What is the purpose of swing doors in elevator systems?
• Why is regular testing important for elevator door sensors?
• What is a recommended practice for ensuring proper function of automatic elevator doors?
• How do smart elevator door systems improve user experience?
• What agency is responsible for national elevator safety standards?
• What maintenance should be performed on elevator door seals?
• What kind of modifications to elevator doors can improve accessibility?
• How much must horizontal sliding doors overlap the entrance frame?
• In a center-opening horizontal door system, what is the term for the hoistway door engaged by the car door?
• The maximum overlap of a closed swing door against the frame should be at least?
• Which aspect of door installation is critical for ensuring passenger safety?
• In terms of door function, what is true about the number of hangers on single-speed, horizontal sliding doors?
• What role does a training program play in elevator door safety?
• What is used to achieve accurate plumbing of the door frame?
• How can vibration affect the performance of elevator doors?
• What role does the door hold open device play in elevators?
• What is essential for keeping elevator doors secure during emergency situations?
• True or False: Horizontal sliding doors require two strike jambs for proper function.
• Which door is referred to as the trailing door in a center-opening system?
• What is a common failure point in elevator door operators?
• What is the purpose of installing a spreader board between the side jambs?
• Which factor is crucial when considering the installation of elevator doors in a high-rise building?
• Most elevator entrances installed today typically use which type of strut angle?
• How should elevator door hardware be maintained?
• What does periodic inspection involve as part of elevator door maintenance?
• Which statement is true regarding the installation of push button boxes?
• When considering the installation of horizontal sliding doors, what detail regarding door panel alignment should be prioritized?
• What is the function of a pressure-sensitive edge on a door panel?
• The distance between the inside face of a swing door panel and the edge of the sill should not exceed?
• What would you typically find as the primary purpose of a spreader board in elevator doors?
• What is a common requirement for elevator doors to comply with safety regulations?
• What must happen to the doors when the car of an automatic elevator leaves the floor?
• What is the primary purpose of door strikers?
• What feature can enhance the safety of swinging elevator doors?
• When drilling overhead, which protective item should always be worn?
• What is one primary function of elevator doors?
• What is the purpose of the hoistway door interlock?
• What tools should be used when leveling the sill?
• What is the typical clearance required above the door header?
• What is required for an elevator door to comply with ADA standards?
• What is a common regulation for elevator entrance dimensions?
• Are unitized sill brackets adjustable for vertical positioning?
• What kind of finish is often applied to elevator doors for better aesthetics?
• Which standard sets the requirements for elevator door safety?
• Which component is essential for elevator doors to function correctly in detecting obstructions?
• Why is it important to check door proximity sensors regularly?
• In a two-speed, horizontal sliding entrance, the door panels are known as?
• What is a key safety feature of automatic sliding doors?
• Before starting the entrance installation, you should check the distance from the rail centerline to the _______ line at each floor?
• What type of angles are used to anchor a partial strut installation to the floor beam above when necessary?
• What is the purpose of visual indicators on elevator doors?
• The hand of a door panel in an elevator is determined by its direction of travel when?
• How many return jambs and strike jambs do horizontal sliding doors typically have?
• Which test is conducted to ensure door operation safety?
• On automatic elevators, the swing door must close by what mechanism if the car leaves the landing zone?
• Why are lockout/tagout procedures important during installation?
• What aspect of elevator door systems requires adherence to local building codes?
• What role does a door operator play in an elevator system?
• When setting expansion-type anchors, what should be used to ensure the anchor remains flush with the surface?
• What is the purpose of fascias in elevator door installations?
• What is a common cause of elevator door misalignment?
• What does the distance shown on the sill support erection drawings from the rail center to the face of the sill represent?
• What factor could determine the design of elevator doors in a residential building?
• Why are door edges often equipped with protective materials?
• What role does the door frame play in elevator entry?
• What type of sensor uses infrared light to prevent door closing?
• What is the role of the door operator in an elevator system?
• What is the minimum depth that door guides for horizontal sliding doors must be within the sill groove?
• What does the term "endless belt" refer to in elevator door systems?
• What type of cover is fastened to the header to prevent dirt from accumulating on the door tracks?
• When selecting elevator door materials, what should be considered?
• What is the primary advantage of having automatic doors in elevators?
• What are fitted in place between the top of each header and the sill above?
• In a door installation, the main purpose of the header is to?
• What proactive measures can be taken to extend the life of elevator doors?
• The minimum height of a barricade toeboard must be _______ inches?
• How should door operating mechanisms be lubricated?
• Which mechanism is crucial for controlling the speed of elevator door movement?
• What should be checked regarding the finished floor before setting the sill?
• What is a key safety feature for swing doors in elevator installations?
• How should the edges of elevator doors be designed for safety?
• What is a common feature of modern elevator door systems?
• Why is it important to test elevator doors after installation?
• What is the potential impact of a malfunctioning door edge?
• In terms of elevator design, what is the purpose of an entrance frame?
• Which device provides power to the door operator?
• What might indicate that there is an issue with the interlock system in the elevator door?
• What is the impact of faster door speeds on passenger safety?
• Which mechanism is used in entrances with more than one door panel?
• The purpose of a hanger cover in door installations is to?
• Barricades around the hoistway entrance must be at least how many inches in height?
• What is one requirement for swing doors used as emergency accesses on blind hoistways?
• During inspections, what condition of elevator doors could indicate a need for maintenance?
• What type of switch is often used to detect if the doors are open?
• When the riser is over two or three floors and you do not have a running platform, what should be used?
• Why is it necessary to install anti-jump devices on elevators?
• For center-opening doors, the maximum distance from the door edge to the sill edge on the hoistway side is?
• What occurs to the elevator doors in an automatic system when the car is called to a different floor?
• What role does weatherproofing play in the installation of elevator doors?
• What safety feature prevents elevator doors from closing on passengers?
• What tool should be used to clean threads filled with mortar in the header?
• What is the purpose of the elevator door safety edge?
• What is the advantage of using Unistrut in door frame installations?
• What method should be used for keeping the hole on center when drilling in concrete?
• What type of bolts are used to fasten door hangers to the doors?
• What is the function of a door control panel?
• Which of these is a common material used in elevator door construction due to its durability?
• What material is commonly used for elevator doors?
• What does the term "door lock" refer to in elevator systems?
• What type of emergency feature may be included in an elevator door system?
• What component is designed to be bolted to the header and secured to the wall in a partial strut installation with masonry walls?
• Why is it important for elevator door components to be made from high-strength materials?
• In terms of maintenance, what is crucial for elevator door systems?
• What is the standard width for a typical passenger elevator doorway?
• To avoid mistakes, the door installation drawings should be compared to the _______?
• What is the maximum distance from the bottom of the door panel to the sill for horizontal sliding doors?
• At which level does sill installation typically begin?
• What type of door is often used in high-rise elevators?
• In a partial strut installation, whose responsibility is it to carry the weight of the doors?
• How many tracks do two-speed, center-opening doors have?
• If the rough floor is uneven, where should the sill be set?
• What is the name of the bottom-most fascia that spans from the lowest sill to the pit wall?
• Which feature is essential for compliance with safety codes in elevator systems?
• How do interlock systems enhance elevator safety?
• Which type of door operates by sliding to the side?
• How are electrical interlocks always configured in a system?
• What aspect should be prioritized when selecting weather stripping for elevator doors?
• How many return jambs do center-opening doors have?
• What is the typical thickness of passenger elevator doors?
• In what scenario should heavy-duty door casings be used?
• What should be done to prevent water damage to elevator doors in outdoor settings?
• What is a common cause of elevator door binding?
• What role does a control panel play in an elevator system?
• In which situations should door operation be manually overridden?
• Properly installed gibs will have what amount of friction when doors are operated?
• A GFCI will open a circuit if it senses an imbalance between supply and _______ current?
• What code regulates elevator installations in the U.S.?
• What is a common issue to troubleshoot when elevator doors fail to operate smoothly?
• What is the maximum allowable distance from the hoistway face of the door to the edge of the sill on automatic elevators with horizontal sliding doors?
• When should safety gaskets be replaced during door installation?
• What is required for a frame when using partial struts with drywall walls?
• What does NEMA stand for in the context of electrical enclosures for elevators?
• What type of door system is commonly used in low-rise elevators?
• When might an elevator require a fire service mode?
• What does the term "door closing force" refer to?
• Why is it necessary to train personnel on elevator door systems?
• What maintenance task is recommended for elevator door tracks?
• What is the typical function of a door operator in elevators?
• What is a critical consideration when selecting materials for elevator doors in coastal environments?
• What are the signs of a failing elevator door operator?
• What safety mechanisms must be inspected regularly on elevator doors?
• What must be verified after installing an elevator door?
• What minimum height must vision panels be for compliance?
• For a service elevator requiring a wider opening, which type of entrance is typically installed?
• What is the purpose of a door hold open lamp?
• What is the primary purpose of emergency stop buttons in relation to elevator doors?
• What is the required extension of the sill guard below the floor on automatic leveling elevators?
• When using a running platform to set the sills, what can be marked on the platform for easy transfer?
• What is the typical maximum speed for passenger elevators?
• What type of installation requires a pit for the elevator?
• Which component limits the upward movement of the door hanger?
• Which of the following describes a benefit of maintaining a maximum clearance of 3/8 inches?
• To enhance safety, elevator door edges should be equipped with what feature?
• What type of sensor is commonly used to detect obstructions in elevator door operations?
• If vision panels are installed in elevator doors, what is the minimum thickness of the glass required?
• The clearance between the car platform sill and the car sill should be between which measurements?
• What is used to conceal the various mechanisms on the hoistway side of the door?
• Which of the following is a potential hazard if elevator doors are not properly maintained?
• What role do automatic doors play in modern elevator systems?
• How often should elevator doors be inspected?
• Why might weatherproof materials be particularly important in an outdoor elevator installation?
• What should you confirm before the installation of elevator doors?
• What is the function of a door operator in an elevator system?
• Which of the following statements is true about properly installed gibs?
• Which property of elevator door materials is essential for high-traffic areas?
• In elevator terminology, what does the term "landing door" refer to?
• What does the term "door travel" refer to in elevator service?
• What are the two most common types of elevator doors?
• How can the design of elevator doors impact building aesthetics?
• What should be regularly checked to maintain elevator door operation?
• How can you ensure proper sealing of elevator doors?
• What maintenance procedure should be regularly performed on elevator door sensors?
• In terms of installation, what must be considered when determining the Overlap of swing doors?
• In elevator door installation, what is the function of a guide rail?
• What type of maintenance is crucial for elevator door operation?
• What can be the consequence of improper elevator door installation?
• What should be done if the elevator doors do not align properly?
• Is it true that in the hoistway, you can work below other trades as long as you have a hard hat on?
• Why is code compliance important in elevator installations?
• What supports the plumb bobs when plumbing the door frame?
• Which component is crucial for ensuring passenger safety during the installation of elevator doors?
• What is a main function of the elevator door jamb?
• What is a primary concern when selecting components for elevator doors in safety regulations?
• What is the typical application for relating devices in elevator door systems?
• What is the term for the area where elevator doors are installed?
• What is typically required for a reliable electrical interlock installation?
• How should the elevator door edges be treated to enhance safety?
• What component is essential for the automatic opening of elevator doors?
• Which part of the elevator door system assists with the smooth operation of the doors?